Product ID:18005PB, MIL-R-19907D PASTE HARDENER PART B
MSDS Date:03/18/1997
FSC:2090
NIIN:00-372-6064
Status Code:A
Kit Part:Y
MSDS Number: CLQJM

BONDED PRODUCTS, INC

439 SOUTH BOLMAR STREET
WEST CHESTER, PA 19381-0039

Emergency Phone: 215-739-9960

Info Phone: 610-696-9220 OR 215-739-9960

Preparer: JOHN BARTUSIAK

Cage: DO082

BONDED PRODUCTS, INC

39 WEST CHESTER, PA 19381-0039

Telephone: 610-696-9220 OR 215-739-9960

Cage: DO082

POLYAMIDE RESIN

CAS: 68410-23-1

ALUMINUM SILICATE

CAS: 12269-78-2

BLACK IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 PPM

ACGIH TLV: 5 MG/M3

MILLED GLASS

CAS: 65997-17-3

ACGIH TLV: 10 MG/M3

SILICON DIOXIDE, AMORPHOUS

CAS: 67762-90-7

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/MS

TRIPHENYL PHOSPHITE

CAS: 101-02-0

RTECS: TH1575000

PARA-TOLUENESULFONAMIDE RESIN

CAS: 1338-51-8

TRIETHANOLAMINE

CAS: 102-71-6

RTECS: KL9275000

ACGIH TLV: 5 MG/M3

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE AND CHRONIC): A KNOWN
SENSITIZER WHICH MAY CAUSE SKIN RASH WITH PROLONGED OR REPEATED
CONTACT AND CAN CAUSE IRRITATION OF THE NOSE, THROAT AND LUNGS.
Explanation of Carcinogenicity:NO INFORMATION FOUND.
Effects of Overexposure:INHALATION: MAY CAUSE NAUSEA AID CAN BE
IRRITATING TO AIR PASSAGES UPON PROLONGED EXPOSURE. SKIN AND EYE
CONTACT: MAY CAUSE SKIN IRRITATION WITH PROLONGED OR REPEATED
CONTACT. PROLONGED EXPOSURE TO VA PORS CAN CAUSE EYE IRRITATION.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: IRRITATION
OF SKIN. REDNESS AND ITCHING. INGESTION: INGESTION HEALTH RISKS ARE
NOT USUAL. IF INGESTED, CAN CAUSE A BDOMINAL DISCOMFORT.
Medical Cond Aggravated by Exposure:SKIN ABRASIONS AND HEAD COLDS.

First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
CALL A PHYSICIAN. SKIN: WASH WITH MILD SOAP AND WATER AFFECTED
EXPOSED SKIN SURFACES. INHALATION: REMOVE VICTIM TO FRESH AIR. GIVE
OXYGEN IF BREATHING IS DIFICULT. CALL A PHYSICIAN. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE.

Flash Point Method:COC
Flash Point:>98.9C, 210.F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:FULL GEAR COMPLETE FIRE FIGHTING EQUIPMENT
INCLUDING SELF-CONTAINED BREATHING UNIT. REMAIN UPWIND FROM FIRE.
SPRAY WATER ON THE CONTAINERS IN FIRE AREA TO KEEP COOL AND PREVENT
FROM BURSTING.
Unusual Fire/Explosion Hazard:HANDLE AS A COMBUSTIBLE MATERIAL WHEN
EXPOSED TO FIRE, SEALED CONTAINERS IN A FIRE AREA MAY DEVELOP
PRESSURE AND BURST.

Spill Release Procedures:CONTAIN SPILL & REMOVE IGNITION SOURCES. SOAK
UP WITH ABSORBENT MATERIALS. WEAR PROTECTIVE CLOTHING FOR SKIN AND
EYES. SHOVEL INTO CONTAINERS FOR SAFE SHIPMENT TO APPROVED DISPOSAL
AREAS. WORK IN A WE LL VENTILATED AREA.

Handling and Storage Precautions:WORK IN A WELL-VENTILATED AREA.
PRACTICE GOOD CAUTION AND PERSONAL CLEANLINESS TO PREVENT EYE AND
SKIN CONTACT. AVOID BREATHING VAPORS, WASH EXPOSED SKIN AREAS AFTER
HANDLING PRODUCT, STORE IN A COOL, DRY AREA, IN TIGHTLY CLOSED
CONTAINERS.
Other Precautions:LAUNDER CLOTHING BEFORE REUSE. DISCARD HEAVILY
CONTAMINATED CLOTHING, HEAVILY CONTAMINATED SHOES, AND LEATHER
ARTICLES.

Respiratory Protection:NIOSH APPROVED MASKS IN ABSENCE OF PROPER
ENVIRONMENTAL CONTROLS.
Ventilation:LOCAL: REQUIRED TO DISSIPATE VAPORS. MECHANICAL:
RECOMMENDED. SPECIAL: BLOW VAPORS AWAY FROM OPERATOR.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH PROOF GOGGLES OR FACE SHIELD.
Other Protective Equipment:IMPERVIOUS GARMENTS, SAFETY SPRAY OR SHOWER,
EYE BATH.
Work Hygienic Practices:PRACTICE GOOD CAUTION, PERSONAL CLEANLINESS TO
PREVENT EYE & SKIN CONTACT. WASH EXPOSED AREAS ESPECIALLY BEFORE
EATING.
Supplemental Safety and Health
PRODUCT CODE: 18005PB. HMIS CODE: H-2, F-1, R-1, P-C.

HCC:V5
Boiling Pt:B.P. Text:NOT DETERMINED
Spec Gravity:1.1 TO 1.2
Solubility in Water:VERY SLIGHT
Appearance and Odor:BLACK PASTE WITH AN AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE
Hazardous Decomposition Products:BURNING MAY PRODUCE NITROGEN OXIDES,
CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:REACT THIS PART B WITH PART A AND DISPOSE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.